Sold!

1998 BIESSE POLYMAC SINGLE SIDED EDGEBANDER Model: ERGHO 2; SN: 80132; 220v; 60hz; 3ph. 15 mm (5/8”) Cap. Edgebanding thickness, min. panel width 85 mm & min. length 160 mm, max. Panel thickness 45mm; automatic strip & coil feed magazine with 3 mm PVC guillotine. Compact size, underneath infeed magazine mounted Teflon coated Hot Melt glue pot, dual digital thermostats, 1” dia. glue applicator roller; pressure section with (1) large dia. “non-stick” coated drive roller and (3) pneumatic pressure controlled idle rollers, horiz. adj. w/digital indicator. Workstations: Front & rear end trims (0.5hp – 12,000 rpm motors), motors travel on 45 degree slides and tilt 0-12 degree on horiz. Plane; top & bottom flush trims (1HP – 12,000RPM motors), digital readouts for easy setup, Feed chain with “anti-slip” 80 mm wide rubber pads, self-lubrication chain pads, variable feed speed 29 – 60 FPM, with 2 HP feed drive; PLC microprocessor control for workstation function & feed speed, remote control jog button. Complete with: Heated infeed fence, insulated sound enclosure over all trim stations rotating operator control panel w/keypad and LCD readout, extendable side panel support rail, 6 KVA – 240 Hz digital frequency inverter.

Sold!

2003 LOBO STRAIGHT LINE RIP SAW Model: 303; sn: n/a; 220/440v; 3ph; 60hz; 10hp., 4,500 RPM Direct drive bottom mounted arbor, 1" dia. arbor, 12" max. blade cap., 3-1/4" max. depth of cut, 12" min. length; 15" throat cap., 59" long x 33" wide table. 1 HP 3-Step feed speed, 45 - 65 & 85 FPM, 6" twin chain drive, automatic chain lubrication. Top pressure system with roller holddowns. Complete with: Rip fence, push buttons, magnetic starter and 4" dia. dust outlet.

Sold!

2004 SCM 16” JOINTER, TERSA HEAD Model: F410n; SN: AB2162564; 220/440v; 60hz; 3ph; 6.6hp. 16" Width cap., 6.6 HP motor belt drives head at 4,500 RPM, 4-3/4" dia. 4-knife cutterhead, 3/8" max. depth cap., 3/8" x 16" rabbeting cap. 16" x 94-1/2" Cast iron table, front table 53" long, rear table approx. 41" long, 32" table height; 43" x 7" fence tilts 0ø - 45ø.

Sold!

2004 SCM 20” PLANER Model: S520e; SN: AB162557; 20" Width cap., 9 HP main motor - 4-3/4" dia. 4-knife cutterhead at 4,500 RPM, 1/8" - 9-1/4" powered opening with digital readout for fine adjustment, max. depth of cut 5/16", 10" min. length of workpiece; (4) feed speeds at 20 - 33 - 43 & 56 FPM; table size 20-3/4" x 39". Equipped with: Chip breaker, sectional grooved infeed & solid outfeed rollers, (2) adjustable bed rollers. - Complete with: Magnetic starter & shaving hood220/440v; 3ph;

Sold!

2004 SCM 1-1/4” MODE T110, SHAPER 220/440v; 3ph; 60 Hz; 6.6hp, interchangeable spindle, (5) spindle speeds of 3,000 - 4,500 - 6,000 - 8,000 & 10,000 RPM. 39" x 25" Table size, 13.4" max. insert opening, 5-1/4" under nut; adjustable fence guard assembly. Complete with: Mechanical spindle brake, hand spindle lock, reverse rotation switch, and (5) table insert rings. Steffa Model: M0T3 Power Feeder. Complete with: Power cord, vertical & horizontal support columns, and universal joints for full adjustments.

Sold!

37” SCMI SINGLE COMBINATION HEAD WIDE BELT SANDER MODEL UNO S/N:AE/012943 - 091127; 220/440v; 3ph; 60cy; 18hp. w/ steel 4” helical grooved roll and 1-1/2” platens; 18hp main motor; Using 37” X 60” sand paper w/ pneumatic tracking and tensioning. Motorized bed w/ 1/8” to 6-1/4” opening on four Jack Screws; Digital readout and auto thickness set-up; Two speed 1-1/2hp conveyor: 15’ to 30’ FPM; double infeed and outfeed rolls; Safety stop bars and load meter; 6-1/4” dust chute.

Sold!

JLT 8’ WALL CLAMP RACK W/ 18 CLAMPS Free standing 8' wide x 24" deep. - Equipped with: (3) Levels for mounting clamps; (6) clamps per level (a total of 18), manually adjusted side-to-side and manual open-and-close for all clamps.

Sold!

2000 ROBLAND 20” PLANER JOINTER COMBO Model: SD-510/SD-B 510; S/N: 20004578; 20” X 9” planer cap, w/ digital display for height;b4” round four knife cutter head; 7-1/2hp belt drive motor; four speeds: 15, 24, 30,48 fpm, 20” X 89” cast iron jointer table w/ tilt aluminum fence; 20” X 32” plane infeed table w/three infeed/outfeed rollers and two bed rollers. Magnetic controls.

Sold!

ROBLAND X31 COMBO MACHINE Model: X31; 220v; 1ph; 60hz; Sliding Table Saw, Shaper. Slider: 31 ½” X 17 ½” w/ 50” stroke; 10” blade w/ “ arbor; 3hp motor; 0* - 45* tilt; 3-3/16” max @90* -- 2-1/8” max @45*; Shaper: 3hp motor; two spindles ¾” – 1 ¼” ; speeds: 3,000 – 6,000rpm; 13 ½” X 14 ½” sliding table; 7” max tooling dia.; 5” under nut.

Sold!

6” WOODTECK EDGE SANDER 2HP, 115/230V, 1PH, 22/11A, 1,720 RPM, On/Off Switch - Toggle, mechanical. Belt Speed - 3,600 FPM. Belt Size 6" x 89", Table Size - 29-1/2" x 9-3/4". Dust Port - 4" dia. Overall Dimensions - 45"H x 46"W x 22"D.

Sold!

SCMI Mode T110 SHAPER 220/440V; 60CY; 3PH; 6.6hp. Five speeds 3k, 4.5k, 6k, 8k and 10,000rpm on a 1-1/4” changeable spindle, Mechanical spindle break; spindle lock; reverse.

Sold!

NORTHFIELD 1-1/4” SHAPER Model: SP; S/N: 592410k., 208/220/440v; 3ph; 60hz; 3hp., 5” under the nut, w/ 4-1/2” of travel; 8,000rpm belt drive; Mag start; push button control; hand brake; adjustable fence; Table size: 36” X 26” w/ 36” height

Sold!

ADVANTAGE SANDER W/ DUST COLLECTOR 220v; 3ph; 60hz.15" Dia. dynamically balanced disc, & 6" x 61" belt w/cast iron fence; 1.5 HP -1,740 RPM direct drive motor; 15" x 8-1/4" table w/miter gauge slot, tilts 30ø upward & lowers 45ø downward;, Heavy Duty cabinet base containing dust bag. Separate dust collector motor w/ multiple pickups.

Sold!

8’ MARTIN SLIDING PANEL SAW, MODEL T75 SN: 82752. 220/440V; 60cy; 3ph., 6.3hp main motor; 3/4hp scoring motor. 49” rip; main table 30 X 41”; multi speed capacity, Crosscut fence; 16” main blade.

Sold!

SCM 1-1/4” SHAPER Model: T110n; Year: 2004. 220/440v; 3ph; 60 Hz; 6.6hp, 1-1/4" interchangeable spindle, (5) spindle speeds of 3,000 - 4,500 - 6,000 - 8,000 & 10,000 RPM. 39" x 25" Table size, 13.4" max. insert opening, 5-1/4" under nut; adjustable fence guard assembly. Complete with: Mechanical spindle brake, hand spindle lock, reverse rotation switch, and (5) table insert rings. Includes: Maggi Model: M0T3 Power Feeder. Complete with: Power cord, vertical & horizontal support columns, and universal joints for full adjustments. This machine is in demo/show-room condition.

Sold!

SCHLEICHER BORING MACHINE Model: D-8192; S/N: 10005; Year: 1990. 220v; 3ph; 60hz. 5 spindle boring machine w/ pneumatic hold down; Actuated by foot pedal. In perfect condition.

Sold!

2004 DELTA 14” BAND SAW

Sold!

SCMI 57" SLIDER Model: SI 12; SN: AB 33332. 230v; 3ph; 60hz; 6.6hp, 57" Sliding table stroke, 57" x 10" sliding table; 6.6 HP main & 0.75 HP - 8,300 RPM scoring motor; 12" main blade, 4" scoring blade; (3) speeds on main blade of 3,200 - 4,500 & 6,000 RPM; tilting arbor 0ø - 45ø, up to 33-1/2" between blade & rip fence.

Sold!

CORAL 5HP DUST COLLECTOR High efficiency collector, 5 HP - 3,400 RPM fan motor, (3) upper filter bags & (3) lower collection bags, rated at 4,310 CFM, 27 cubic feet collection capacity

Sold!

DELTA SHAPER 1-1/4” Solid spindle, 5 HP motor; 7,000 & 10,000 RPM spindle speeds, 5-3/4" spindle travel; 30" x 25" approx. table size. Heavy duty fence.

Sold!

OMGA RADIAL ARM SAW, Max. crosscut cap: 23-5/8" Wide x 4-1/2" deep (at 90ø); 4 HP - 3,200 RPM motor, 14" saw blade and a 1" dia. arbor; the saw head swivels & tilts both in the horizontal & vertical axis. 3-3/16" Depth of cut at 45ø bevel cut, ripping cap. is 32-5/8", miters 45ø to left & right. Table size 31" x 35", wooden tabletop with built-up full length back fence. Equipped with: Totally enclosed upper blade guard, gravity type lower blade guard, self-braking motor with electromagnetic brake (stops blade within approx. 2 Sec), magnetic controls, and push button station.

Sold!

RITER Frame Clamp w/6 Pneumatic Hold downs

Sold!

2005 FESTOOL VACUUM SANDER

Sold!

SCMI MINI MAX L55 STROKE SANDER, Semi-automatic single belt Sander w/stationary bed; 6" x 280" abrasive belt, 65 FPS belt speed, 4 HP motor. Features: 8' x 3' Sliding table with 27-1/2" vertical adjustment, table also pivots from horizontal to vertical for edge sanding; 43" max. working height, 0.33 HP table lifting motor. Complete with: Stroker pad, guard & dust hood package; table folds up and Sander only uses 21" of space from back wall for efficient storage.

Sold!

WOODMASTER DOUBLE DRUMSANDER SINGLE PHASE 220V, 2-Head, 38" wide, 7.5 HP - 1,725 motor; 0" - 5-1/4" stock thickness range; 6" dia. dynamically balanced hollow steel drum uses 6" wide felt back adaptable abrasives (steel drum is covered with Hook & Loop). Features: 0.16 HP Gearhead conveyor motor, variable conveyor feed speed from 0 - 16 FPM; (1) infeed & (1) outfeed rubber covered (on each drum) holddown roller; (2) 5" dust port. - Includes: Extra rolls of abrasive paper.

Sold!

RELIANT 8” JOINTER SINGLE PHASE 220V. 8" Cap., 0.5 HP motor, 76" table, electronically balanced cutterhead with (3) knives and bottom pocket springs. Features: Easy-to-use knife setting gauge; precision ground cast iron fence with positive stops at 90ø & 45ø; separate external levers for in- & outfeed table depth-of-cut adjustment. Complete with: Swing-away cutterhead guard for safe operation of the machine, magnetic starter and thermal overload switch.

Sold!

14” RELIANT BANDSAW SINGLE PHASE MACHINE 14" Dia. cast aluminum wheels, 2 HP LEESON motor; approx. 15" x 15" cast iron table, table tilts 0ø - 45ø. Blade cap. 1/8" - 1/2", blade length 89-1/2", blade speed 3,000 SFM; max. cutting height 6", max. depth of cut 10". Complete with: Oversized MDF work table area & fabricated steel base.

Sold!

GRIZZLEY 20" PLANER

Sold!

WOODTEK SHAPER 1” spindle, 3 HP - 3,450 RPM motor, spindle speeds of 7,000 & 10,000 RPM, 3" vertical spindle travel; table size 20" x 27".

Sold!

CENTERAL MACHINERY HOLLOW CHISEL MORTISER

Sold!

GRASS HINDGE INSERTER ECOPRESS 220V SINGLE PHASE.

Sold!

MAKITA 12” CONTRACTORS PLANER SINGLE PHASE 110

Sold!

DELTA HOLLOW CHISEL MORTISER BENCH MOUNTED

Sold!

WORLD AIR 5HP, Vertical Tank Mounted Air Compressor

Sold!

JET 3HP DUST COLLECTOR SINGLE PHASE 220V. 3 HP Free-standing Collector, rated at 1,500 CFM; (2) 20" dia. x 48" upper cloth filter bags, (2) 20" dia. x 34" lower cloth collection bags with 10 cu. ft. cap. Unit on common base, comes with one 6" inlet into blower. Equipped with: Push button starter switch; base is mounted on (4) swivel casters. - Dimensions: 36" x 26" x 60" Height overall.

Sold!

GRIZZLEY 5HP DUST PORTABLE DUST COLLECTOR w/ roll around casters mounted below a steel platform base. (2) Fabric filter top bags are placed above fabric collection bags. 2,300 CFM Output with single-stage blower. 6" Inlet with a removable "Y" fitting with (3) 4" openings. 12" Radial Fin. 5 HP motor. 30-Micron filter bags.

Sold!

2004 LOBO 3HP 1-BAG DUST COLLECTOR

Sold!

2004 LOBO 3HP 1-BAG DUST COLLECTOR

Sold!

HERCULES 3HP 1-BAG DUST COLLECTOR

Sold!

2004 LOBO 3HP 1-BAG DUST COLLECTOR

Sold!

(2) STEFF 3 ROLL FEEDER, with (3) 4-3/4" dia. & 2-1/4" wide rubber feed rollers, standard roller hardness is 60 shore, (2) SPEED - 1 HP motor, (4) speeds (13-26-36-72 FPM) forward & reverse, head can be used in any position up to a full 180ø, standard reach of head from base is 20". Change gears are hardened, electrostatic power coated finish on cast parts, external lubrication points for each roller shaft.

Sold!

CONTRACTOR SAW 110V SINGLE PHASE

Sold!

LUMBER

Sold!

DELTA 15” BENCH TOP DRILL PRESS 110V SINGLE PHASE

Sold!

BUFFALO No. 18 DRILL PRESS

Sold!

ROCKWELL 15” DRILL PRESS BENCH TOP

Sold!

SAWBUCK

Sold!

WACKER G5.6 GASOLINE GENERATOR

Sold!

ASSORTED CLAMPS

Sold!

TABLE SAW